| Back

Stereo Box DS

Performance integrated amplifier



The high-performance integrated amplifier features dual-mono amplification topology using the highest quality PWM amplifier modules (two per channel) for audiophile-grade sound. This amplifier is not only powerful but, is capable of driving difficult speaker loads and is stable down into 2 ohm operation. In addition to four pairs of RCA line level jacks to accommodate a selection of analog inputs, a USB digital input provides easy direct interface with computers. The built-in D/A converter provides superb sound from your computer files and simplifiesinterface and operation. The large and legible display readout provides status of every operational mode and can be read across the room. The massive metal case shields the internal circuitry form not only detrimental vibrations but also electromagnetic interference. Additionally, the outboard power supply also contributes to the low-noise environment. An IR remote control is supplied.


Output Power
2 x 40W / 60W at 8 ohms / 4 ohms (both channels driven)

Frequency Response
10Hz - 50kHz (+0dB/-3dB)

Channel Separation
> 40dB @ 20kHz

Signal to Noise Ratio
> -90dB (IEC -A)

2 pr RCA Jacks

Line Level Inputs
4 pr RCA Jacks

Input Impedance
100k ohms

USB Mini B Connector, USB cable supplied

D/A Converter
Texas Instruments PCM2706. 16-Bit /48kHz Delta Sigma, 128-times oversampling

Sampling Rates
44.1kHz and 48kHz

Speaker Connectors
4mm Banana Jacks, Spade Connectors or Bare Wire

Outboard Power Supply
24V/5A DC

Outboard Power Supply
24V/5A DC

Power Consumption
5A DC, <1W standby

Dimensions (WHD)
4.1 x 2.9 x 5.7 in.,103 x 72 x 144 mm

2.6lbs., 1,180g without power supply

Black or Silver